碱性介质中氢氧化反应电催化剂的开发:从机理认识到材料设计

阴离子交换膜(AEM)燃料电池因具有使用非贵金属作为催化剂的优点而受到广泛关注.然而,在碱性体系中,AEM燃料电池中氢氧化反应(HOR)的反应动力学比在酸性介质中的慢两个数量级.针对HOR在碱中动力学缓慢的问题,有两种主要的理论来解释,(1)pH相关的氢结合能作为主要影响因素来控制HOR动力学的理论;(2)质子和氢氧根离子的吸附共同作为影响因子来控制HOR在碱性条件下的动力学的双功能理论.本文首先讨论了在碱性电解质中可能的HOR反应机理及其Tafel性能变化.除了传统的Tafel-Volmer和Heyrovsky-Volmer-HOR机理外,还讨论了最新提出的氢氧根离子吸附参与的HOR机理来说明在酸性和碱性介质中HOR机理的差异.然后,总结了具有代表性的碱性HOR催化剂(如贵金属、合金、金属间化合物、镍基合金、碳化物、氮化物等),简要介绍了它们相应的HOR反应机理,从而进一步理解在碱性介质中不同基元反应步骤给HOR性能带来的差异.最后,提出了一种未来设计HOR碱性催化剂的可行性方案,为今后碱性环境下的HOR催化剂设计提供参考.     

甘油氧化的光谱电化学傅里叶变换衰减全反射谱红外光谱薄膜流动池中硼酸镍层厚度的优化

在碱性甘油电氧化反应中,利用电化学傅里叶变换衰减全反射谱红外光谱法,研究了薄膜流动池中滴注硼酸镍催化剂负载量对玻碳电极性能的影响.连续操作的径向流动池包括一个位于内反射元件上方50μm的钻孔电极,可实现红外光谱分析.这是在确定条件下对电催化剂进行简便和可重复筛选的一个适合的方法,同时还提供了对复杂反应(如甘油氧化)产物选择性的检测.通过对泵送电解液进行更耗时的定量高效液相色谱分析,结果表明,衰减全反射红外光谱法可快速鉴定产物.在层流条件下,水中使用0.1 M甘油和1 M KOH,流速为5μL min-1时,甘油转化率较高.转化率和选择性取决于催化剂的负载量,负载量又决定了催化剂层的厚度和粗糙度.由于在更粗糙的膜中停留时间更长有利于再吸附和C-C键断裂,因此当负载量最高达210μg cm-2时,甘油转化率为73％且甲酸选择性接近80％.当最低负载量为13μg cm-2时,甘油转化率达到63％,甲酸选择性降至60％,相应地,C2物种(如乙醇酸盐)选择性较高,为8％.因此,只有催化剂负载量较低时才能形成几微米厚度范围内的薄膜,此时才适合进行优质催化剂的筛选.     

修饰吡啶衍生物的染料敏化光阳极水氧化性能的研究

染料敏化光电化学电池(DSPECs)是构建人工光合作用体系的潜在方式,其优势在于可通过优化染料结构来拓展可见光吸收范围,从根本上提高太阳能利用效率.染料敏化光阳极在受激发产生电荷分离之后,激发电子注入TiO₂半导体导带,由于其导带位置比传统的可见光半导体,如BiVO4和Fe3O4等相比较负,因此理论上可以在较小的偏压下取得较大的光电转换效率,也更有利于和光阴极相耦合实现无偏压分解水.电荷传输动力学研究表明,注入到TiO₂导带的电子向氧化态光敏剂和催化剂的回传是造成体系能量损失的主要原因,集中体现在光电流密度和效率的降低.目前,已经报道了多种手段来减少DSPECs光阳极表面的电子回传,包括使用带有长烷基链的锚定基团对水氧化催化剂进行修饰,在半导体表面引入电子中介体以及使用核-壳结构的基底等.其中,SnO2/TiO₂基底被广泛应用在染料敏化光阳极中,这种基底可以提高光生电子的注入效率,同时两种金属氧化物之间的异质结有效抑制了电子回传,从而提高了DSPECs的光电活性.然而,核-壳结构基底需要使用原子层沉积技术来制备,所以操作相对复杂.本文基于Ru-bda(bda=2,2'-联吡啶-6,6'-二羧酸)结构的分子水氧化催化剂和带有磷酸修饰基团的三联吡啶钌通过共吸附的方式制备染料敏化光阳极,在不使用核-壳结构基底的情况下,利用吡啶衍生物对TiO₂电极表面的修饰来减少电子回传.本文利用一系列吡啶衍生物作修饰负载在TiO₂光阳极上(TiO₂|RuP,1;RuP=Ru(4,4'-(PO3H2)2-2,2'-联吡啶)(2,2'-联吡啶)2;1=Ru(bda)(L)2,bda=2,2'-联吡啶-6,6'-二羧酸,L=(10-吡啶-4-基氧基)癸基)膦酸.在100 mW/cm2的白光照射下(λ>400 nm),TiO₂|RuP,1,P1(P1=4-羟基吡啶)光阳极在0.4 V(vs.NHE)的外加偏压下获得了1 mA/cm2的光电流密度,其光电流比未修饰吡啶的光阳极增加了42%.同时,其入射光子-电流转化效率在470 nm波长的单色光光照下达到最大,为13.6%.经过吡啶衍生物所修饰的光阳极光电性能和文献中利用核-壳结构基底所制备的类似光阳极性能相当,且光电流密度随吡啶对位取代基供电性能的增强而增大.瞬态吸收光谱和电化学阻抗谱测试表明,吡啶吸附在光阳极上能有效地抑制界面上的电子回传,延长电荷分离寿命,是光电流增加的根本原因,这也表明有机小分子修饰是提高染料敏化光阳极性能的简单、有效的策略.     

基于硅基硼掺金刚石电极的电化学-原位核磁共振波谱电解池的设计、制备与可行性研究

电化学与核磁共振波谱联用技术（EC-NMR）可以实时监测电化学反应过程,从分子水平阐释反应机理,是一种非常有前景的无损在线检测技术。本文首次报道以硅基硼掺金刚石（Si/BDD）作为工作电极的原位EC-NMR三电极单室电解池的设计和制作。研究表明,由于尺寸12.5 mm × 1.2 mm × 0.5 mm的Si/BDD电极在核磁检测区的体积较小且电极材料厚度较薄,因此该电极对射频场的阻碍较小,对磁场均匀性破坏也相应较小。运用自制的EC-NMR电解池并以经典的对苯二酚（QH ₂）电氧化生成对苯二醌（Q）作为模型体系,原位研究了该电化学反应的整个动态过程。在1.2 V恒电位下电解0.1 mol·L^-1 QH₂ 64分钟,监测到位于6.83 ppm处的Q特征峰逐渐生成,反应过程中核磁谱峰未发生裂分或明显的展宽。结果表明,应用本文所设计并制备的原位EC-NMR电解池,可有效对电化学反应物和产物进行定性、定量分析,将可在后续的电化学原位核磁波谱研究中发挥重要作用。     

SC-ICP-MS法测定金属元素的方法研究

为了使用单细胞电感耦合等离子体质谱(SC-ICP-MS)方法准确测定单个细胞中的铬(Cr)、锰(Mn)、铁(Fe)、铜(Cu)和锌(Zn)等多种内源性金属元素,该文基于动态反应池(DRC)模式对目标分析物的反应气流量和极杆抑制参数q(RPq)进行了优化,并研究了进样速度、细胞密度、驻留时间等因素对SC-ICP-MS检测的影响。分别采用细胞悬液直接进样、使用超声波探头使细胞悬液中的细胞破碎后进样和使用浓硝酸消解细胞后进样的ICP-MS测定结果对SC-ICP-MS定量结果的准确性进行验证分析。实验结果表明,可采用超声波破碎细胞的ICP-MS测定结果评估SC-ICP-MS测定的单细胞内Zn和Cu含量的准确性,采用酸消解细胞的ICP-MS检测结果验证单细胞内Fe和Cr的含量。缺少细胞标准物质时对SC-ICP-MS方法定量结果进行多角度验证是必要的。研究表明,使用SC-ICP-MS法可以较好地进行单细胞元素相关分析。     

Gold Nanowires – Assisted Prussian Blue Enhancing Peroxidase – Like Activity for the Non-enzymatic Electrochemically Sensing H2O2 Released From Living Cells

Prussian blue nanoparticles (PBNPs) have peroxidase-like activity for H₂O₂. However, PB alone have poor electrochemical performances. Herein, a strategy was proposed by direct in-situ growth PBNPs onto gold nanowires (AuNWs) surface to obtain the peroxidase-like activity with about 4.05 times higher than that of PBNPs alone. PBNPs@AuNWs was employed to construct a non - enzymatic electrochemical H₂O₂ sensor with the detection limit of 5.3×10⁻⁹ mol/L (S/N=3). The sensor was successfully used to detect H₂O₂ in human serum samples or secreted from living HeLa cells. It may be a competitive candidate for H₂O₂ assaying in biological samples or cellular investigation.     

Protective Effect of Ferulic Acid against Hydrogen Peroxide Induced Apoptosis in PC12 Cells

Ferulic Acid (FA) is a highly abundant phenolic phytochemical which is present in plant tissues. FA has biological effects on physiological and pathological processes due to its anti-apoptotic and anti-oxidative properties, however, the detailed mechanism(s) of function is poorly understood. We have identified FA as a molecule that inhibits apoptosis induced by hydrogen peroxide (H₂O₂) or actinomycin D (ActD) in rat pheochromocytoma, PC12 cell. We also found that FA reduces H₂O₂-induced reactive oxygen species (ROS) production in PC12 cell, thereby acting as an anti-oxidant. Then, we analyzed FA-mediated signaling responses in rat pheochromocytoma, PC12 cells using antibody arrays for phosphokinase and apoptosis related proteins. This FA signaling pathway in PC12 cells includes inactivation of pro-apoptotic proteins, SMAC/Diablo and Bad. In addition, FA attenuates the cell injury by H₂O₂ through the inhibition of phosphorylation of the extracellular signal-regulated kinase (ERK). Importantly, we find that FA restores expression levels of brain-derived neurotrophic factor (BDNF), a key neuroprotective effector, in H₂O₂-treated PC12 cells. As a possible mechanism, FA increases BDNF by regulating microRNA-10b expression following H₂O₂ stimulation. Taken together, FA has broad biological effects as a neuroprotective modulator to regulate the expression of phosphokinases, apoptosis-related proteins and microRNAs against oxidative stress in PC12 cells.     

Modulating Protein–Protein Interactions by Cyclic and Macrocyclic Peptides. Prominent Strategies and Examples

Cyclic and macrocyclic peptides constitute advanced molecules for modulating protein–protein interactions (PPIs). Although still peptide derivatives, they are metabolically more stable than linear counterparts, and should have a lower degree of flexibility, with more defined secondary structure conformations that can be adapted to imitate protein interfaces. In this review, we analyze recent progress on the main methods to access cyclic/macrocyclic peptide derivatives, with emphasis in a few selected examples designed to interfere within PPIs. These types of peptides can be from natural origin, or prepared by biochemical or synthetic methodologies, and their design could be aided by computational approaches. Some advances to facilitate the permeability of these quite big molecules by conjugation with cell penetrating peptides, and the incorporation of β-amino acid and peptoid structures to improve metabolic stability, are also commented. It is predicted that this field of research could have an important future mission, running in parallel to the discovery of new, relevant PPIs involved in pathological processes.     

Actuating Shape Memory Polymer for Thermoresponsive Soft Robotic Gripper and Programmable Materials

For soft robotics and programmable metamaterials, novel approaches are required enabling the design of highly integrated thermoresponsive actuating systems. In the concept presented here, the necessary functional component was obtained by polymer syntheses. First, poly(1,10-decylene adipate) diol (PDA) with a number average molecular weight M_n of 3290 g·mol⁻¹ was synthesized from 1,10-decanediol and adipic acid. Afterward, the PDA was brought to reaction with 4,4′-diphenylmethane diisocyanate and 1,4-butanediol. The resulting polyester urethane (PEU) was processed to the filament, and samples were additively manufactured by fused-filament fabrication. After thermomechanical treatment, the PEU reliably actuated under stress-free conditions by expanding on cooling and shrinking on heating with a maximum thermoreversible strain of 16.1%. Actuation stabilized at 12.2%, as verified in a measurement comprising 100 heating-cooling cycles. By adding an actuator element to a gripper system, a hen’s egg could be picked up, safely transported and deposited. Finally, one actuator element each was built into two types of unit cells for programmable materials, thus enabling the design of temperature-dependent behavior. The approaches are expected to open up new opportunities, e.g., in the fields of soft robotics and shape morphing.     

Microwave-Assisted One-Pot Lipid Extraction and Glycolipid Production from Oleaginous Yeast Saitozyma podzolica in Sugar Alcohol-Based Media

Glycolipids are non-ionic surfactants occurring in numerous products of daily life. Due to their surface-activity, emulsifying properties, and foaming abilities, they can be applied in food, cosmetics, and pharmaceuticals. Enzymatic synthesis of glycolipids based on carbohydrates and free fatty acids or esters is often catalyzed using certain acyltransferases in reaction media of low water activity, e.g., organic solvents or notably Deep Eutectic Systems (DESs). Existing reports describing integrated processes for glycolipid production from renewables use many reaction steps, therefore this study aims at simplifying the procedure. By using microwave dielectric heating, DESs preparation was first accelerated considerably. A comparative study revealed a preparation time on average 16-fold faster than the conventional heating method in an incubator. Furthermore, lipids from robust oleaginous yeast biomass were successfully extracted up to 70% without using the pre-treatment method for cell disruption, limiting logically the energy input necessary for such process. Acidified DESs consisting of either xylitol or sorbitol and choline chloride mediated the one-pot process, allowing subsequent conversion of the lipids into mono-acylated palmitate, oleate, linoleate, and stearate sugar alcohol esters. Thus, we show strong evidence that addition of immobilized Candida antarctica Lipase B (Novozym 435^®), in acidified DES mixture, enables a simplified and fast glycolipid synthesis using directly oleaginous yeast biomass.